Heating networks Cleaning
Regardless of whether an installation is old or brand new, once it is switched on, it contaminates the system water in different ways.
The consequences of rust corrosion is caused, among other things, by oxygen in water.
The erosion that "Sticks" to the piping and particles (rust residues, magnetite, etc.) circulating in the system cause damage.
Electrochemical or galvanic corrosion
Each heating system contains different metals. Through its water system these metals come in contact with each other through electrolytes that are included. This causes electrochemical or galvanic corrosion.
IN A DIRTY SYSTEM…
Radiators and underfloor heating wear out. They block control or lock valves or leaks occur. Heat exchangers, pumps and valves have a shorter service life. Energy losses are BIG Faults due to incorrect pH value Excessively high or low pH values "scrape" the material, with the result that the heat exchanger, pipes and fittings need to be replaced.
Steel is very sensitive to low pH values, while aluminum can be damaged by high alkaline pH values. Through this, bacteria and mold in the water after a while can be harmful factors, due to the accumulation of gas (methane). In systems where water is heated to a low temperature, these organisms affect the pH values of the water.
FERNOX CLEANERS MADE IN ENGLAND
Fernox cleaners remove sludge deposits (magnetite), dissolve salts and residues from new or pre-existing heating systems, to restore and maintain energy efficiency. These are neutral cleaners, for putting new systems into operation. To remove sludge deposits, dissolve salts and other sediments to restore their heating efficiency existing facilities. For home systems, the results show that where Fernox Protector F1 is used after cleaning, it may achieve fuel savings of up to 15% each time the space is heated Fernox products are compatible with all the materials commonly used in Heating systems: stainless steel, mild steels, malleable cast iron, copper, brass, welded joints with soft or strong welding and aluminum. They are easy to use and can circulate under normal system operating conditions during cleaning. They can be used with the most common dynamic rinsing pumps. They are neutral, harmless formulas Fernox cleaners remove sludge deposits (magnetite), dissolve salts and residues from new or pre-existing heating systems, to restore and maintain energy efficiency. These are neutral cleaners, for launching new systems.
Our company with specialized and trained staff undertakes the cleaning of every heating, cooling, solar heating system etc. We use special machines exclusively for this purpose and all the special chemicals of FERNOX The cost of such work is usually amortized during a heating season by high energy savings without calculating the restorations of possible damage due to residues.